Tips for troubleshooting water heater issues

fixing water heater
Minerva Studio/Shutterstock

This article originally published on Thumbtack and is syndicated by Cheapism.


Your hot water heater is complicated. But not so complicated that you can expect ice-cold showers to become part of your routine. If your hot water heater isn't working, click through to learn how to fix it with these easy tips. If these tips don't work, a specialist will likely need to make some repairs.

water heater
Thumbtack

Your gas hot water heater isn't a toy. It’s a highly pressurized machine. Always turn off the gas and power before working on your heater. And if there’s a standing pool of water, shut off the gas and water supply to the heater and step away. Contact a licensed professional to handle the rest. When in doubt: make safety your top priority.


Related: How much does it cost to repair water heaters?


heating controls of a hot water heater
Lost_in_the_Midwest/Shutterstock

If your pilot light is off, it means your water tank isn’t lit. With gas water heaters, no flame means no heat. To check your pilot light, turn the gas control knob on your heater to the setting marked “pilot.” This will keep the burner from igniting while you’re checking things out.


Lift up the bottom cover to see if there’s any flame on the pilot gas supply tube. You’ll find instructions on your tank to relight it if needed.

water heater pilot light
Lost_in_the_Midwest/Shutterstock

If your pilot won’t light, you might have issues with your thermocouple (which measures the temperature in the tank) or sediment buildup in your pressure relief valve. Either way, there’s little you can do without bringing in a professional to flush your water heater tank or install new parts.


Related: How much does a new water heater cost?

circuit breaker
The Toidi/Shutterstock

Your electric water heater won’t work if it isn’t getting any power. If you notice that the lights aren’t on and the system has gone cold, it’s very likely the issue is the power supply. Luckily, it’s an easier fix.


Start by checking the circuit breaker that controls the tank. Your circuit breaker (or fuse box if your house is older) is a metal box attached to the wall with a thin metal door. They can be installed inside or outside the house — contact your landlord or seller if you can’t find yours.


Related: How much does it cost to replace a circuit breaker switch?

Circuit breaker
uros1210/Shutterstock

If a fuse or circuit has been tripped, reset it by flipping the breaker off and on (but don’t force anything). Make sure that your water heater isn’t sharing a fuse with any other appliances. The heightened voltage from a shared fuse or circuit could easily cause your system to short.


If it’s blown, you’ll have to replace it with a fuse of the same rating. If you’re not sure where to start, have an electrician check it out.


Related: How much do electricians charge near you?

water heater temperature
cunaplus/Shutterstock

If you have to leave your hot water faucet running for an unusually long time before the water gets hot — or you run out of hot water pretty fast when you’re showering — you might need to replace your electric heating element.


Most electric water heaters have two heating elements: one at the top of the tank and one lower element. Power enters the system at the top, runs to the high-temperature cut-off switch (in the middle) and flows out to the thermostat. When the water on the top of the tank is hot it turns off, and the lower element kicks in to heat the next batch of water.

water heater heating element
STEKLO/Shutterstock

Testing and replacing your system’s heating element is inexpensive but it requires extreme care around wires and outlets. Plus, you’ll need specialized tools like a non-contact voltage tester and a continuity tester. You could start a fire or worse if you handle these things wrong. Play it safe, and hire a skilled pro to do it for you.


Related: What's the average cost of water heater repairs?

hot water heater tank
Charles Knowles/Shutterstock

Water heating problems are some of the most common plumbing issues. On average, water heater repairs cost $150-$250, depending on what’s wrong. Some problems like tank leaks may not be fixable and can signal that it’s time to replace an older water heater

https://thumbtack.57ib.net/c/34592/269257/4348?subId1=msnshop&subId2=34592&utm_source=cma-affiliate&u=https%3A%2F%2Fwww.thumbtack.com%2Fk%2Fwater-heater-installation%2Fnear-me

.


Tank-style water heaters use natural gas or an electric coil to heat the water in the tank. Gas water heaters are generally less energy-efficient than electric water heaters, but the cost of electricity may make gas a better choice. It really just depends on how you use your heating system. Water heater issues are similar and depend on whether you have a gas or electric heater.


The cost to replace the thermostat or heating element are about the same. Costs can vary for a full replacement of the heater.


Related: How much does it cost to install a tankless water heater?


Advertisement