Is Akron tap water safe to drink? Here's what we know about Akron's water boil alert
Residents in the western part of Akron as well as Fairlawn Heights, Fairlawn and Copley Township east of Route 21 are facing a water boil alert after a water main was taken out of service for repairs on Monday night.
"Critical repairs" were needed on the 36-inch water main after Akron found a significant reduction of water pressure in the affected areas.
The city's water division took samples from the affected areas for testing and expect results Wednesday afternoon that will advise if the water is safe for consumption, at which point the boil order will be lifted.
Here's what we know about Akron's water boil advisory.
How long does water need to boil to be safe?
According to the city of Akron, all customers within this area who experienced the low pressures, or are unsure, are advised to boil their water until further notice.
Water used for drinking or cooking should be brought to a full boil for a minimum of 2 minutes and returned to the proper temperature before use. The water is safe for showering and laundry.
Is Akron water hard or soft?
According to a water hardness map from H2O Distributors, Akron - and much of Ohio - is described as having very hard water, which is classified as over 10.5 grains per gallon.
What residents should do after the boil alert is lifted?
According to solefoodkitchen.com, these are five things you should do after a boil alert lifts.
Run all cold water faucets in your home for at least five minutes.
If you get your water from a dispenser in your refrigerator, run the water for at least five minutes until it is clear.
Flush automatic ice makers.
Run water softeners through a regeneration cycle.
Run an empty dishwasher for a full cycle.
This article originally appeared on Akron Beacon Journal: Akron water boil alert: What we know about Akron tap water safety
