GE Unveils the Ten Global Finalists for its Open Innovation Jet Engine Bracket Design Quest
GE Unveils the Ten Global Finalists for itsOpen Innovation Jet Engine Bracket Design Quest
- GE selects ten finalists from nearly 700 global design entries representing 56 countries to move onto the final phase of its Quest
- Finalists' designs leverage additive manufacturing techniques to reduce weight of a jet engine bracket
- Finalists are based in Australia, France, Hungary, Indonesia, Italy, Poland, Romania, Sweden and the United Kingdom
FAIRFIELD, Conn.--(BUSINESS WIRE)-- GE (NYS: GE) today unveiled ten Phase I finalists from its Jet Engine Bracket Design Quest. This design Quest invited individuals, companies and institutions to redesign loading brackets found on jet engines using 3D printing. A critical component of a jet engine, brackets support the weight of the engine during handling and must withstand significant vibrations during flight.
Additive manufacturing has the potential to reduce the weight of a single aircraft engine by one thousand pounds and drive substantial reduction in fuel consumption. The Quest combines the power of additive manufacturing with open innovation and seeks design solutions which will not only reduce the bracket weight but also improve its strength and performance.
Mark Little, Senior Vice President and Chief Technology Officer, GE Global Research Center said, "We have entered into a new era ofmanufacturing that is leveraging the proven power of open innovation. Additive manufacturing is allowing GE, together with the Maker community, to push the boundaries of traditional engineering. These finalists have demonstrated what can be achieved by embracing this more open, collaborative model."
The Quest, which launched in June 2013, drew a record number of design entries via the GrabCAD platform's community of entrepreneurs, institutions and companies. Each finalist will receive $1,000 and move on to the second phase, in which the jet engine bracket designs will be additively manufactured and subjected to load testing by GE.
"The GE Quest has been one our most successful challenges, in terms of number of entrants, technical sophistication of submissions and quality of results", said Hardi Meybaum, CEO of GrabCAD."It's been great watching the community exploit the advantages of additive manufacturing in such a demanding application."
Located around the world, finalists include:
- Ármin Fendrik, based in Hungary, is a third-year university student and this entry is among his first 3D printing designs.
- Thomas Johansson, Ph.D, based in Sweden, is a consultant for a Swedish hyper-car manufacturer and is a champion snowmobile drag racer.
- Nic Adams, based in Australia, supported the installation of a pathology lab automation system in a Sydney hospital, which includes a robotic handling system that helps analyze hundreds of test tubes each day.
- M Arie Kurniawan, based in Indonesia, is co-founder of an engineering firm that provides high quality mechanical engineering, design optimization and product design services.
- Sebastien Vavassori, based in the United Kingdom, is a stress engineer for a leading European space manufacturer and service provider.
- Piotr Mikulski, based in Poland, works as a rapid prototyping systems specialist for a Polish-Swiss joint-venture that provides industrial and machining services.
- Andreas Anedda, based in Italy, is a postgraduate university student and holds three patents.
- Alexis Costa is based in France.
- Mandli Peter is based in Hungary.
- Fidel Chirtes is based in Romania.
The second phase of the Quest will run from September 17 to November 15 and the top eight designs will receive awards from a total prize pool of $20,000.
This Quest and GE's focus on additive manufacturing are part of the company's continued commitment to the ongoing industrial revolution - advanced manufacturing. GE is the world's largest user of additive technologies in metals, with a full-scale additive manufacturing facility in Cincinnati, Ohio, and a global team of 600 engineers across 21 sites.
More information on the Open Innovation Jet Engine Bracket Design Quest can be found at: http://grabcad.com/challenges/ge-jet-engine-bracket-challenge. More information on additive manufacturing can be found at: http://www.ge.com/stories/additive-manufacturing.
GE (NYS: GE) works on things that matter. The best people and the best technologies taking on the toughest challenges. Finding solutions in energy, health and home, transportation and finance. Building, powering, moving and curing the world. Not just imagining. Doing. GE works. For more information, visit the company's website at www.ge.com.
About GE Global Research
GE Global Research is the hub of technology development for all of GE's businesses. Our scientists and engineers redefine what's possible, drive growth for our businesses, and find answers to some of the world's toughest problems.
We innovate 24 hours a day, with sites in Niskayuna, New York; San Ramon, California; Ann Arbor, Michigan; Bangalore, India; Shanghai, China; Munich, Germany; and Rio de Janeiro, Brazil. Visit GE Global Research on the web at www.ge.com/research. Connect with our technologists at http://edisonsdesk.comand http://twitter.com/edisonsdesk.
GrabCAD is leading the Open Engineering movement, helping engineers get products to market faster by connecting people, content and technology. GrabCAD Workbench makes it easy for engineers to share files, work with partners and complete projects on time, while the GrabCAD Community accelerates the design process by tapping into the knowledge and resources of the largest source of CAD content and engineering minds in the world. Founded in 2010, the company is backed by Matrix Partners and Charles River Ventures and is headquartered in Cambridge, MA with development offices in Estonia and the UK. Learn more at http://grabCAD.com/.
Sebastien Duchamp, 1-646-682-5604
KEYWORDS: United States North America Connecticut
The article GE Unveils the Ten Global Finalists for its Open Innovation Jet Engine Bracket Design Quest originally appeared on Fool.com.Try any of our Foolish newsletter services free for 30 days. We Fools may not all hold the same opinions, but we all believe that considering a diverse range of insights makes us better investors. The Motley Fool has a disclosure policy.
Copyright © 1995 - 2013 The Motley Fool, LLC. All rights reserved. The Motley Fool has a disclosure policy.