Peregrine Semiconductor Introduces Industry's Highest-Isolation RF Switch for Wireless Infrastructure Market
SPDT switch enables increased network capacity and higher data rates
SAN DIEGO--(BUSINESS WIRE)-- Peregrine Semiconductor Corporation, a fabless provider of high-performance radio frequency integrated circuits (RFICs), today announced availability of the industry's highest-isolation SPDT RF switch for the wireless infrastructure market. The UltraCMOS® based PE42420 RF switch has high isolation of 64 dB @ 4 GHz—an approximately 20% increase over competing devices on the market.* Additionally, the switch features HaRP™ technology enhancements to deliver high linearity, with an IIP3 of 65 dBm. By providing high linearity and isolation in a single, small package, the PE42420 switch simplifies Digital Pre-Distortion (DPD) loop design, which reduces cost and shortens time to market. This high-performance switch enables increased network capacity and higher data rates in infrastructure applications such as Base Station Transceiver Systems (BTSs), Remote Radio Heads (RRHs), and wireless backhaul; as well as Industrial, Scientific and Medical (ISM) band devices that operate in the 2.4 GHz and 5.8 GHz frequencies.
"As we enter a period of major mobile broadband capacity upgrades, network equipment vendors are challenged to provide mobile operators with flexible, backward-compatible solutions to replace 2G and 3G network products with LTE-ready systems that are capable of supporting multiple standards," said Mark Schrepferman, director of the communications and industrial product line for Peregrine's High-Performance Solutions business unit. "At the same time, the demand for higher data rates is requiring improved network performance, which we believe is driving market needs for high-isolation and high-linearity RF components. The PE42420 switch enables equipment vendors to meet these network modernization challenges."
In order to maximize network performance in next-generation wireless communication systems, high port-to-port isolation is required, to prevent the output signal from spilling into adjacent radio channels or bands. Additionally, because the DPD receiver is shared by multiple Power Amplifiers (PAs) in these systems, high isolation between the multiple paths ensures that the PA that is being sampled is not contaminated by other signals. The 0.1 to 6 GHz PE42420 switch supports 1.8V control logic, enabling the use of lower-voltage, and lower-power, microcontrollers. ESD tolerance of 2kV HBM on all pins eases manufacturing and results in higher reliability of the end product.
Development Tool Support
The PE42420 Evaluation Kit (part # EK42420-02, $95.00) is available, to enable designers to evaluate the PE42420 switch in their applications. The kit can be ordered today, from Peregrine's global direct sales representatives and worldwide distribution partners.
Packaging, Pricing & Availability
The PE42420 switch is available in a 20-pin 4 mm x 4 mm LGA package and is priced starting at $1.25 each. Samples and volume-production quantities can be ordered today, through Peregrine's global direct sales representatives and worldwide distribution partners. For more information, visit http://www.psemi.com.
About Peregrine Semiconductor
Peregrine Semiconductor (NAS: PSMI) is a fabless provider of high-performance radio frequency integrated circuits (RFICs). Our solutions leverage our proprietary UltraCMOS®technology, an advanced RF Silicon-On-Insulator process. Our products deliver what we believe is an industry-leading combination of performance and monolithic integration, and target a broad range of applications in the aerospace and defense, broadband, industrial, mobile wireless device, test and measurement equipment, and wireless infrastructure markets. Additional information is available at http://www.psemi.com.
The Peregrine Semiconductor name, logo, and UltraCMOS are registered trademarks of Peregrine Semiconductor Corporation in the U.S.A., and other countries. HaRP is a trademark of Peregrine Semiconductor Corporation in the U.S.A., and other countries.All other trademarks mentioned herein are the property of their respective owners.
Connect with Peregrine Semiconductor
Hi-res images available through editorial contact or Flickr (feel free to publish):
Product Photo: http://bit.ly/15gc4Bt
Evaluation Kit Photo: http://bit.ly/15gc4Bt
Product Specifications Graphic http://bit.ly/ZdMFRG
Functional Diagram http://bit.ly/17nyMHp
*Based upon Peregrine Semiconductor's competitive analysis of current datasheets.
Sr. Public Relations Generalist
KEYWORDS: United States North America California
The article Peregrine Semiconductor Introduces Industry's Highest-Isolation RF Switch for Wireless Infrastructure Market originally appeared on Fool.com.
Try any of our Foolish newsletter services free for 30 days. We Fools may not all hold the same opinions, but we all believe that considering a diverse range of insights makes us better investors. The Motley Fool has a disclosure policy.
Copyright © 1995 - 2013 The Motley Fool, LLC. All rights reserved. The Motley Fool has a disclosure policy.