IXYS Colorado Introduces the IXRFD630 and IXRFD631 High Power RF Drivers

Before you go, we thought you'd like these...
Before you go close icon

IXYS Colorado Introduces the IXRFD630 and IXRFD631 High Power RF Drivers

FORT COLLINS, Colo.--(BUSINESS WIRE)-- IXYS Corporation (NAS: IXYS) , a leader in power semiconductors, mixed-signal and digital ICs for power conversion and motion control applications, announced today the introduction of the IXRFD630 and IXRFD631 High Power RF Drivers by its IXYS Colorado division. This driver succeeds the DEIC420 and DEIC421 and represents the next generation of RF driver for 13.56 and 27.12 Mhz RF power.

Packaged in our surface mount DE Series RF package to minimize stray lead inductance, the IXRFD630 and IXRFD631 offer optimum switching performance.


The IXRFD630 and IXRFD631 is a CMOS high-speed, high-current gate driver specifically designed to drive MOSFETs in Class D and E HF RF applications as well as other applications requiring ultrafast rise and fall times or short minimum pulse widths. The IXRFD630 can source and sink 30A of peak current while producing voltage rise and fall times of less than 4ns and minimum pulse widths of 8ns. The input of the driver is compatible with TTL or CMOS and is fully immune to latch up over the entire operating range. Designed with small internal delays, cross conduction or current shoot through is virtually eliminated. The features and wide safety margin in operating voltage and power make the IXRFD630 unmatched in performance and value.

The IXRFD630 and IXRFD631 are ideal for applications such as:

  • Driving RF MOSFETs
  • Class D and E RF Generators
  • Multi-MHz Switch Mode Supplies
  • Pulse Transformer Driver
  • Pulsed Laser Diode Driver
  • Pulse Generator

"We are excited to be able to offer the next generation driver for power RF applications. The IXRFD630 and IXRFD631 offer an excellent combination of power, size and performance," commented Stephen Krausse, General Manager of IXYS Colorado.

IXRFD630 Features:

  • High Peak Output Current
  • Low Output Impedance
  • Low Quiescent Supply Current
  • Low Propagation Delay
  • High Capacitive Load Drive Capability
  • Wide Operating Voltage Range

Added features for the IXRFD631

  • Kelvin connections reduce ground bounce

While the IXRFD631 replicates the performance of the IXRFD630, the improvement stems from a Kelvin ground connection on the input side that allows use of a common mode choke substantially reducing ground bounce and false triggering. Along with the Kelvin ground pin, additional bypass capacitance has been added on the substrate to further stabilize the supply rails while providing better decoupling at the die. The IXRFD631 can source and sink 30A of peak current while producing voltage rise and fall times of less than 4ns and minimum pulse widths of 8ns. The input of the driver is compatible with +5V or CMOS with a fixed threshold level.

The IXRFD630 and IXRFD631 are available directly from IXYS Colorado (Directed Energy) Tel. (970) 493-1901, Fax (970) 232-3025, Email sales@ixyscolorado.com, http://www.ixyscolorado.com or through your local authorized IXYS/IXYSRF sales representative.

About IXYS

IXYS Corporation develops and markets primarily high performance power semiconductor devices that are used in controlling and converting electrical power efficiently in power systems for the telecommunication internet infrastructure, motor drives, medical systems, solar energy, wind energy, electrical generators and transportation. IXYS also serves its markets with a combination of digital and analog integrated circuits, RF power products and power subsystems including application-specific, embedded system-on-chip (SoC) solutions for the industrial and consumer markets.

Safe Harbor Statement

Any statements contained in this press release that are not statements of historical fact, including the performance, rating, availability, reliability, operation and suitability of products for various applications, may be deemed to be forward-looking statements. There are a number of important factors that could cause the results of IXYS to differ materially from those indicated by these forward-looking statements, including, among others, risks detailed from time to time in the Company's SEC reports, including its Form 10-Q for the quarter ended December 30, 2012. The Company undertakes no obligation to publicly release the results of any revisions to these forward-looking statements.



IXYS Corporation
Jacque Laguna, 970-493-1901
j.laguna@ixyscolorado.com

KEYWORDS:   United States  North America  California  Colorado

INDUSTRY KEYWORDS:

The article IXYS Colorado Introduces the IXRFD630 and IXRFD631 High Power RF Drivers originally appeared on Fool.com.

Try any of our Foolish newsletter services free for 30 days. We Fools may not all hold the same opinions, but we all believe that considering a diverse range of insights makes us better investors. The Motley Fool has a disclosure policy.

Copyright © 1995 - 2013 The Motley Fool, LLC. All rights reserved. The Motley Fool has a disclosure policy.

Read Full Story

Want more news like this?

Sign up for Finance Report by AOL and get everything from business news to personal finance tips delivered directly to your inbox daily!

Subscribe to our other newsletters

Emails may offer personalized content or ads. Learn more. You may unsubscribe any time.

From Our Partners